Pulsafeeder SPO >> Controllers >> Timers >> MPT Series

Home | About Us | Product List | Contact Info

Features

1 Chemical Feed Timer

Two Point Calibration

DIN connections for I/O

Full 24 Month Warranty

MPT Programmable Controller Series

The MPT Programmable Controller Series continuously regulate the amount of chemicals added to a system, for savings of costly chemicals and time. They are designed using advanced microprocessor technology and the latest in the surface mount assembly techniques. The result is amazing versatility in a compact, reasonably priced controller package. The units are simple to program using the clearly labeled keypad and the bright alphanumeric display. Select from an array of timers --- distinctive receptacle cords make easy to connect any electrical device being controlled.

Key Features:

A high resolution 10 bit A/D converter for greater accuracy

Fully isolated differential inputs for all circuits help prevent the possibility of ground loops

Keypad activated hand/off/auto control of all relay output

Modular hardware and software for easy access and servicing

A prewired NEMA 4X enclosure for protection from harsh environments

Options
The MPT Series controller offer a wide range of additional options to help you select the proper controller for your specific needs. Conduit connections are available where hard wiring is preferred and is required for 220VAC service. The optional mounted flow assembly is used to interrupt the controllers outputs when there is less than 1 GPM of flow.

The selectable timer is an available option allowing chemicals to be dosed by any one of the following:

Percent

Pulse with accumulator

Percent post blow down

Limit Timer
An alarm output relay is available to provide an A/C output to an alarm device such as a strobe light or warning siren. Additionally, an alarm dry contact is also available to send an alarm signal to integral building management systems or other controls.

Biological growth can be easily controlled using the optional 28-day biocide timer; this timer is available as a single, dual, or even triple biocide control.

The PULSAworks® serial line communication option can be order with or without an internal modem. These unique features allow for the user to monitor and change the system parameters directly or from a remote location. Data history time stamps are stored at user defined intervals between 1 and 120 minutes. Up to 372 time stamps can be stored before the controller begins to overwrite the existing data. These data history time stamps can then be displayed in chart or tabular format.

Data Sheets & Brochures

DSP-001 - MPT100/200/300
(PDF - 507 KB)

DSP-002 - MPT400
(PDF - 373 KB)

Install & Operations Manuals

MPT100 Manual
(PDF - 3.5 MB)

MPT200 Manual
(PDF - 3.2 MB)

MPT400 Manual
(PDF - 893 KB)

Product List

PULSAtrol Product List
(PDF - 928 KB)

Jump To: Pumps | Controllers | Process Control | Systems | Support